Hydraulic Lifting Table

Hydraulic Lifting Table

Construction of Lifting Table

 

 

 

  • welded platform with plain or chequered steel plate.
     
  • Scissors device in heavy section flat steel plate for all models up to 300 Kg. and in tubular sections for the tables above 300 Kg. capacity.
     
  • Single acting cylinder/Double acting cylinder with chrome steel rod and an end of stroke mechanical stop.
  • Available in Hydro electrical power unit/ Hand Pump Unit placed inside or outside the lifting table.
      
  • Electric control chest placed outside, feeding voltage 12 VDC/24 VDC/1phased 230 or 3phased 400 Volts 50 Hz, connected to the lifting table 
  • An "up-down" and "emergency stop" hand push-button control box connected to the electric control chest .
     
  • Adjustable safety travel limit switches .... mechanical type plastic box
     

Security

  • Double hydraulic safety valve incorporated in the cylinder and a pilot-operated Check valve at this cylinder base for maintenance and locking up of the platform in position in the event of electric voltage failure or hose breaking.
     
  • Mechanical end of stroke stop in each cylinder.
     
  • Pressure limit valve set in the factory, to prohibit a load higher than 1,1 time the lifting table rated capacity.
     
  • Electrical end of stroke switch on high position ; it ensures the automatic stop of the lifting platform at its maximum stroke.
     
  • Safety frame under the platform perimeter to stop the lowering in case of obstacles.
     
  • Safety legs keep the lifting table at a settled level for maintenance.
     
  • Before forwarding, each lifting table is checked and undergoes the regulation tests.
     
  •  

 

 

 

Main options

  • Fix, removable or portable standardize safety handrails.
       
  • Retractable plinth and stop (drop proof security for the lifting trucks).
     
  • Reinforced platform for travelling overload in low position.
     
  • For side protection of the scissors and to forbid access under the lifting plate: safety removable safety skirts with bellows or steel net, curtains fabric or metal on spring winder.
     
  • Manually or motorized swivelling, tilting, telescopic or sliding platform.
       
  • Special treatment for aggressive surroundings (sanding and suitable painting, , plating, hot dip galvanization).
       
  • Specific electric components : explosion-proof, tropicalized, programmable automaton, etc...
     

Special models of lifting tables and equipment, on request.

 DOUBLE SCISSOR

 

Double Scissor Lifting Tables being manufactured in many many sizes shapes and designs with rotary - roller - plane top - starting from 100 kgs upto 10,000 kgs with or without wheels hydraulic hand pump or power pack operated - minimum height 100 mm to maximum height upto 3000 mm.

 

 

 

PIT MOUNTED LIFTED TABLE

 

Pit Mounted Lifted Tables being manufactured in many many sizes shapes and designs starting from 100 kgs upto 10,000 kgs without wheels hydraulic hand pump or power pack operated.

 

 

 

SINGLE SCISSOR

 

Single Scissor Lifting Tables being manufactured in many many sizes shapes and designs starting from 100 kgs upto 10,000 kgs with or without wheels hydraulic hand pump or power pack operated - minimum height 100 mm to maximum height upto 5000 mm.

 

 

 

HIGH RISE

 

High Rise Lifting Tables being manufactured in many many sizes shapes and designs with rotary - roller - plane top - starting from 100 kgs upto 5000 kgs with or without wheels hydraulic hand pump or power pack operated - minimum height 100 mm to maximum height upto 10000 mm.

 

 

 

SMALL SIZE LIFTING TABLE

 

Small Size Lifting Tables being manufactured in many many sizes shapes and designs with rotary - roller - plane top - starting from 100 kgs upto 5000 kgs with or without wheels hydraulic hand pump or power pack operated - minimum height 100 mm to maximum height upto 3000 mm.

If You Need Any Solution.....We Are Available For You

Home
Products
Whats App
Contact Us