Conical Vacuum Mixer
Conical Vacuum Mixer
Use our premium Conical Vacuum Mixer have a specially built spiral agitator to mix well all free following solids. This precision designed conical mixer is suitable for combining different density products as well. Get this advance, super performing conical vacuum mixer now at a very reasonable rate from our company.
Particulars | Vacuum conical Mixer |
Vessel | Vertical Conical stationery |
Vessel Support | Lugs |
Charging | On top cover |
Discharge | On bottom of cone or on side of that part, by gravity |
Rotary Part for mixing | Inclined screw conveyor, running all over conical inside surface while rotating |
Drive & Position | Motor v-belted to heli-bevel-worm reduction, then geared to screw conveyor. Another motor for rotating arm on horizontal plane.Drive is placed on top cover |
RPM range | 45-60 |
Drive lifting | Not needed |
Suitable for mixing | Free flowing solid-solid. |
Liquid spraying | Possible by providing spray ll ball manifold to the swing arm |
Homoginiser | Not required |
Chopper/ Lump breaker | Can be provided near the apex of cone |
Jacketing | Possible |
Vacuum | Possible |
Vac. Sealing | Mech seal, proper sealing is possible due to stationery vessel |
Air filter | Air Vent on Topcover |
Manhole | On top cover/Charging hole itself |
Mixing time | 15-20 minutes |
Drying time For 20% Vapour content | 18-230hrs |
Baffling | Flats between flights |
Mixing method | Conveying up, tumbling down in inclined manner |
Precision of Mixing | Three dimensional, Quite precise even for a small sample and addition |
Suitable for product | Dry powder, drying of centrifuged cake |
HP rating | 80-90% efficiency |
Space occupancy | cone occupies vertical space but less horizontal, and can be suspendedform above floor into below ground |
Safety Factor |
Rotor is totally enclosed, no lifting of drive, hence safe. |
Send Enquiry