Chain Electric Hoist-2 Ton Capacity

Chain Electric Hoist-2 Ton Capacity

Having decades of experience in this industry, we have gained the position of highly reliable manufacturers, suppliers and exporters of Chain Electric Hoist-2 Ton Capacity. These electrical hoists are used to ease the process of material handling and thereby reducing the workforce. Offered hoists are highly efficient in nature and are capable of bearing very heavy loads. Moreover, these hoists are designed to perform easily and impeccably. The hoists we are offering is capable of lifting load up to 2 ton easily. The reliability of Chain Electric Hoist-2 Ton Capacity is assured through their tests in which these hoists are checked with 25 percent overload.

Product Specifications:

Motor: 0.5 HP, 3 Phase, 1440 RPM, Class F, 40% Intermittent Duty, Induction Motor

Exceptions to EH2 Hoist: 6.3 mm, Grade 80, Alloy Steel Material Load Chain

Overall Dimensions: 560 x 410 x 265 mm (Head room x Other Dimensions)

Headroom (With Monorail Electric Traveling Trolley): 620 mm

Headroom (With Monorail Geared Traveling Trolley): 600 mm

Weight of Hoist at 3 Mtr. Lift: 35 Kgs

No. of Falls of Load Chain: 1 Falls

Headroom (Hook Suspension): 560 mm

Extra Weight per Meter: 1.2 Kgs.

Hoisting Speed: 6.4 Mtr./ Min

Further Product Details:

Hooks: As per IS: 15560 - 2005.

Conical Rotor Motor Start Motor

Load Chain Wheel: S.G. Iron Casting

Duty: Class II, 40% Intermittent duty

Overload Relay: Provided for protection to Motor.

Chain Guide: Aluminum provide Load Chain precisely

Load Chain: 8 mm, Grade 80, Alloy Steel Material as per IS: 6216.

Manufactured as per IS: 6547 (Indian Standard) Tested at 25 % Overload

Braking Mechanism: Disc type, Spring Loaded acting at any load position

Gears: Alloy Steel Material, precise machined, gear hobbed & case hardened duly annealed

Designed in two separate independent units Motor Side (Driving Part) & Mechanism Side (Driven Part).

Motor: Conical Rotor Motor operating on 415 Volts, 3 Phase, 50 Hz AC Supply with In-built braking mechanism.

Control Panel Unit: Totally enclosed to protect from Weather, giving output at 24 Volts to the Operational Control Station (Push Button Station).

Operational Control Station: Suspended from Hoist with a Cable & supporting Wire rope with two push buttons extendable to four / six push button station. Operated with 24 Volts.

Limit Switches: Provided to control movement of Hook in Hoisting motion at decided levels activated by Lower Hook & End Stop. Prevents Accidents due to Over-hoisting & Over-lowering.

Send Enquiry