I.C. ENGINE AND AUTOMOBILE LAB
The lab has specialised equipment to undertake both teaching and research related to engines.
- About Us
- Products/Services
-
Heat Transfer Lab.
- Kcht 052 Heat Transfer In Natural Convection
- Kcht 032 Thermal Conductivity Of Insulating Slab
- Kcht 033 Thermal Conductivity Of Liquids
- Kcht 034 Thermal Conductivity Of Metal Rod
- Kcht 041 Dropwise & Filmwise Condensation Apparatus
- Kcht 042 Vertical & Horizontal Condenser
- Kcht 043 Horizontal Condenser
- Kcht 044 Vertical Condenser
- Kcht 051 Heat Transfer In Forced Convection
- Kcht 031 Thermal Conductivity Of Insulating Powder
- Kcht 061 Open Pan Evaporator
- Kcht 061 Open Pan Evaporator
- Kcht 062 Single Effect Evaporator
- Kcht 063 Double Effect Evaporator
- Kcht 064 Calandria Evaporator
- Kcht 071 Emissivity Measurement Apparatus
- Kcht 072 Stefan Boltzmann’s Apparatus
- Kcht 001 Heat Transfer Through Composite Wall
- Kcht 022 Two Phase Heat Transfer Unit
- Kcht 021 Pool Boiling Apparatus
- Kcht 016 Helical Coil Heat Exchanger
- Kcht 015 Cross Flow Heat Exchanger
- Kcht 014 Plate Type Heat Exchanger
- Kcht 014 Plate Type Heat Exchanger
- Kcht 013 Finned Tube Heat Exchanger
- Kcht 012 Shell & Tube Heat Exchanger
- Kcht 011 Parallel Flow Counter Flow Heat Exchanger
- Kcht 007 Fluidized Bed Heat Transfer Unit
- Kcht 006 Unsteady State Heat Transfer Unit
- Kcht 005 Heat Transfer In Agitated Vessel
- Kcht 004 Heat Transfer From A Pin-fin
- Kcht 003 Heat Pipe Demonstrator
- Kcht 002 Heat Transfer Through Lagged Pipe
-
Hydraulics Lab. (fluid Machinery)
- Kchd 115a Francis Turbine Test Rig, Output Power 3kw
- Kchd 202b Tilting Bed Flow Channel
- Kchd 202a Tilting Bed Flow Channel
- Kchd 201b Fixed Bed Flow Channel
- Kchd 201a Fixed Bed Flow Channel
- Kchd 158 Boundary Layer Apparatus
- Kchd 157 Double Stage Air Compressor Test Rig
- Kchd 156 Single Stage Air Compressor Test Rig
- Kchd 155 Wind Tunnel Test Rig (variable Speed With Ac Motor)
- Kchd 154 Axial Fan Test Rig (fixed Speed With Ac Motor)
- Kchd 153 Axial Fan Test Rig (variable Speed With Dc Motor)
- Kchd 152 Centrifugal Blower Test Rig (fixed Speed With Ac Motor)
- Kchd 151 Centrifugal Blower Test Rig (variable Speed With Dc Motor)
- Kchd 116b Kaplan Turbine Test Rig, Output Power 1kw
- Kchd 116a Kaplan Turbine Test Rig, Output Power 3kw
- Kchd 115b Francis Turbine Test Rig, Output Power 1kw
- Kchd 103 Centrifugal Pump Test Rig (with Three Prefixed Speeds)
- Kchd 114b Pelton Wheel Turbine Test Rig, Output Power 1kw
- Kchd 114a Pelton Wheel Turbine Test Rig, Output Power 3kw
- Kchd 113 Hydraulic Ram Test Rig
- Kchd 112 Jet Pump Test Rig
- Kchd 111 Submersible Pump Test Rig
- Kchd 110 Gear Pump Test Rig (with Three Prefixed Speeds)
- Kchd 109 Gear Pump Test Rig (with Variable Speed, Digital Rpm Measurement)
- Kchd 108 Gear Pump Test Rig (with Variable Speed Swinging Field Dynamometer)
- Kchd 107 Reciprocating Pump Test Rig (with Three Prefixed Speeds)
- Kchd 106 Reciprocating Pump Test Rig (with Variable Speed, Digital Rpm Measurement)
- Kchd 101 Centrifugal Pump Test Rig (with Variable Speed Swinging Field Dynamometer)
- Kchd 102 Centrifugal Pump Test Rig (variable Speed, Digital Rpm Measurement)
- Kchd 105 Reciprocating Pump Test Rig (with Variable Speed Swinging Field Dynamometer)
- Kchd 104 Centrifugal Pump Test Rig (multi Stage, Variable Speed, Series & Parallel System)
-
Process Control And Instrumentation Lab.
- Kcpc 001 Pressure Control Trainer
- Kcpc 008a Control Valve Characteristics
- Kcpc 007 Study Of P I And I P Convertor
- Kcpc 004 Flow Control Trainer
- Kcpc 003 Temperature Control Trainer
- Kcpc 002 Level Control Trainer
- Kcpc 008b Control Valve Characteristics
- Kcpc 019 Single Tank System
- Kcpc 010 Time Constant Of Manometer
- Kcpc 009 Characteristics Of P.i.d. Controller
- Kcpc 020 Dead Weight Pressure Gauge Tester
- Kcpc 018 Interacting And Non Interacting System
- Kcpc 017 Two Tank Non Interacting System
- Kcpc 016 Two Tank Interacting System
- Kcpc 015 Force Measurement Apparatus
- Kcpc 014 Measurement Of Level By Capacitance Method
- Kcpc 013 Measurement Of Level By Air Purge Method
- Kcpc 012 Calibration Of Thermocouple
- Kcpc 011 Time Constant Of Thermocouple And Thermometer
-
Chemical Reaction Engineering Lab.
- Kccre 006 Isothermal Plug Flow Tubular Reactor (coiled Tube Type)
- Kccre 017 Hydrodynamics Of Trickle Bed Reactor
- Kccre 016 Rtd Of Packed Bed Reactor
- Kccre 015 Rtd Studies In Plug Flow Reactor
- Kccre 014 Rtd Studies In Continuoused Stirred Tank Reactor (c.s.t.r.)
- Kccre 013 Kinetics Of Dissolution Of Benzoic Acid
- Kccre 012 Liquid Phase Chemical Reactor
- Kccre 011 Combined Flow Reactor
- Kccre 010 Packed Bed Reactor
- Kccre 009 Adiabatic Batch Reactor
- Kccre 008 Isothermal Semi-batch Reactor
- Kccre 007 Isothermal Batch Reactor
- Kccre 018 Emulsion Polymerisation Set Up
- Kccre 005 Plug Flow Tubular Reactor (coil Type)
- Kccre 004 Plug Flow Tubular Reactor (straight Tube Type)
- Kccre 003 Cascade Continuoused Stirred Tank Reactor (c.s.t.r.)
- Kccre 002 Iso Thermal Continuoused Stirred Tank Reactor
- Kccre 001 Continuoused Stirred Tank Reactor
- Kccre 023 Chemical Reactor Teaching Equipment
- Kccre 022 Spinning Basket Reactor
- Kccre 021 Recycle Bed Reactor
- Kccre 020 Uv Photoreactor
- Kccre 019 Condensation Polymerisation Set Up
-
Mechanical Operation Lab
- Kcmo 051 Ribbon Mixer
- Kcmo 031 Plate & Frame Filter Press
- Kcmo 032 Rotary Vacuum Filter
- Kcmo 033 Leaf Filter
- Kcmo 033 Leaf Filter
- Kcmo 041 Bucket Conveyor
- Kcmo 042 Belt Conveyor
- Kcmo 043 Screw Conveyor
- Kcmo 044 Screw Conveyor
- Kcmo 029 Mineral Jig
- Kcmo 052 Sigma Mixer
- Kcmo 053 Fluid Mixing Apparatus
- Kcmo 054 Power Comsumption In Agitated Vessel
- Kcmo 022 Cyclone Scrubber
- Kcmo 023 Elutriator
- Kcmo 024 Magnetic Separator
- Kcmo 025 Froth Floatation Cell
- Kcmo 001 Jaw Crusher
- Kcmo 028 Wilfley Table
- Kcmo 027 Thickner
- Kcmo 026 Cone Classifier
- Kcmo 021 Cyclone Separator
- Kcmo 016 Test Sieves
- Kcmo 015 Gyratory Sieve Shaker
- Kcmo 014 Rotap Sieve Shaker
- Kcmo 013 Trommel
- Kcmo 006 Hammer Mill
- Kcmo 012 Trommel
- Kcmo 011 Vibrating Screen
- Kcmo 005 Rod Mill
- Kcmo 004 Ball Mill (variable Speed)
- Kcmo 003 Ball Mill
- Kcmo 002 Roll Crusher
-
Mass Transfer Lab.
- Kcmt 023 Absorption In Wetted Wall Column
- Kcmt 067 Humidification & Dehumidification Setup
- Kcmt 066 Ion Exchange
- Kcmt 065 Adsorption In Packed Bed
- Kcmt- 064 Experimental Water Cooling Tower
- Kcmt 063 Mass Transfer With & Without Chemical Reaction (solid-liquid)
- Kcmt 062 Vapour-liquid Equilibrium Set Up
- Kcmt 061 Wetted Wall Column
- Kcmt 051 Batch Crystallizer
- Kcmt 044 Fluidized Bed Dryer
- Kcmt 043 Rotary Dryer
- Kcmt 042 Forced Draft Tray Dryer
- Kcmt 041 Natural Draft Tray Dryer
- Kcmt 032 Solid In Air Diffusion Apparatus
- Kcmt 031 Vapour In Air Diffusion Apparatus
- Kcmt 001 Liquid Liquid Extraction In A Packed Tower
- Kcmt 022 Absorption In Packed Bed
- Kcmt 021 Absorption In Sieve Plate Column
- Kcmt 015 Simple Batch Distillation Setup
- Kcmt 014 Steam Distillation Set-up
- Kcmt 013b Continuous Packed Bed Distillation Column
- Kcmt 013a Packed Bed Distillation Column
- Kcmt 012b Continuous Sieve Plate Distillation Column
- Kcmt 012a Sieve Plate Distillation Column
- Kcmt 011b Continuous Bubble Cap Distillation Column
- Kcmt 011a Bubble Cap Distillation Column
- Kcmt 005 Solid-liquid Extraction
- Kcmt 004 Solid-liquid Extraction
- Kcmt 003 Spray Tower
- Kcmt 002 York Scheibels Extraction Unit
-
Theory Of Machine Lab
- Kctom 001 Universal Vibration Apparatus
- Kctom 002 Cam Analysis Apparatus
- Kctom 003 Whirling Of Shaft Demonstrator
- Kctom 004 Static And Dynamic Balancing Demonstrator
- Kctom 005 Motorised Gyroscope (with Stainless Steel Disc)
- Kctom 006 Journal Bearing Apparatus
- Kctom 007 Universal Governor Apparatus (with Stainless Steel Shaft)
- Kctom 008 Coriolli’s Component Of Acceleration Apparatus With Digital Rpm Indicator
- Kctom 009 Michell Tilting Pad Bearing Apparatus
- Kctom 010 Slip And Creep Measurement Apparatus With Digital Rpm Indicator
- Kctom 011 Epicyclic Gear Train Apparatus With Digital Rpm Indicator
- Kctom 012 Pin On Disc Wear Apparatus
-
Thermodynamics Lab
- Kctd 010 Csm Of Actual Single Cylinder Four Stroke Diesel Engine For Plotting Valve Timing Diagram
- Kctd 009 Csm Of Actual Single Cylinder Four Stroke Petrol Engine For Plotting Valve Timing Diagram
- Kctd 001 Single Cylinder Four Stroke Petrol Engine Test Rig
- Kctd 002 Three Cylinder Four Stroke Petrol Engine Test Rig
- Kctd 003 Four Cylinder Four Stroke Petrol Engine Test Rig
- Kctd 004 Single Cylinder Four Stroke Water Cooled Diesel Engine Test Rig
- Kctd 005 Twin Cylinder Four Stroke Water Cooled Diesel Engine Test Rig
- Kctd 006 Four Cylinder Four Stroke Water Cooled Diesel Engine Test Rig
- Kctd 007 Separating & Throttling Calorimeter
- Kctd 007 Separating & Throttling Calorimeter
- Kctd 008 Csm Of Actual Single Cylinder Two Stroke Petrol Engine For Plotting Port Timing Diagram
- I.c. Engine And Automobile Lab
- Environmental And Bio Engineering Lab
- Momentum Transfer Lab
-
Refrigeration And Air Conditioning Lab
- Kcrac 001 Refrigeration Test Rig
- Kcrac 002 Air Conditioner Test Rig
- Kcrac 003 Split Air Conditioning Test Rig
- Kcrac 004 Window Air Conditioning Test Rig
- Kcrac 005 Air Washer Test Rig
- Kcrac 006 Ice Plant Trainer
- Kcrac 007 Water To Water Heat Pump
- Kcrac 008 Water Chiller / Cooler Test Rig
- Kcrac 009 Electrolux Vapour Absorption Test Rig
-
Hydraulics Lab (fluid Mechanics)
- Kchd 054 Flow Over Notches
- Kchd 015 Cavitation Apparatus
- Kchd 016 Laminar Flow Table
- Kchd 017 Metacentric Height Apparatus
- Kchd 018 Center Of Pressure Apparatus
- Kchd 024 Bend Meter Test Rig
- Kchd 053 Flow Through Orifice And Mouth Piece
- Kchd 051 Hydraulic Bench
- Kchd 052 Bernoulli’s Theorem Apparatus
- Kchd 014 Pitot Tube Setup
- Kchd 055 Impact Of Jet On Vanes
- Kchd 056 Losses Due To Friction In Pipe Lines
- Kchd 057 Losses In Pipe Fittings, Sudden Enlargement And Contraction
- Kchd 058 Venturimeter And Orificemeter
- Kchd 059 Reynold
- Kchd 060 Pitot Tube Set Up
- Kchd 061 Metacentric Height Apparatus
- Kchd 062 Study Of Pressure Measurement
- Kchd 010 Discharge Through Venturimeter And Orificemeter
- Kchd 002 Flow Through Orifice And Mouth Piece
- Kchd 003 Discharge Over Notches
- Kchd 004 Impact Of Jet On Vanes
- Kchd 005 Losses Due To Friction In Pipe Lines
- Kchd 006 Losses Due To Pipe Fittings, Sudden Enlargement And Contraction
- Kchd 007 Discharge Through Orificemeter
- Kchd 008 Discharge Through Rotameter
- Kchd 009 Discharge Through Venturimeter
- Kchd 001 Bernoulli’s Theorem Apparatus
- Kchd 019 Electrical Analogy Apparatus
- Kchd 020 Forced Vortex Apparatus
- Kchd 021 Free Vortex Apparatus
- Kchd 022 Darcy’s Law Apparatus
- Kchd 023 Study Of Pressure Measurement
- Kchd 011 Discharge Through Venturimeter, Orificemeter & Rotameter
- Kchd 012 Nozzle Meter Test Rig
- Kchd 013 Reynold’s Apparatus
-
Heat Transfer Lab.
- B2B Leads
- Contact Us
- Enquiry Now
If You Need Any Solution.....We Are Available For You
