Single Faced "Slucie Gate" are extensively used in water supply, waste water applications, water treatment, intake wells, pumping stations, drainage works, irrigation connels, effulent treatment, sewage treatment system, flood control, thermal power station & water cooling systems for controlling the flow or shut off. There are of three types one where the gate with spigot back frame is dirctly mounted on the wall, type two where mounting on the wall is through wall thimble and other where mounting on R.C.C. Channel through channel type frame.

 

Construction under specification IS : 3042

This specification suitable for seating head pressure only. The gates are single machined metal faces Slucie Gate (200 mm to 1200 mm), Gates are in three types in shape square, circular / round & rectangular. Spindle of the gate are also two types one rising spindle other non-rising type. Mounting of the gate are spigot back wall mounted. Rating of the gate are class (6 meter water column) and class II (15 meter water column).

 

Construction Under Specification IS : 13349 – 1992 & AWWA C 501 – 1992

This specification suitable for both seating & unseating head pressure. The gates are single machined metal faces & machined adjustable wedging devices, Sluice Gate (300mm to 2500 mm), Gates are in three types in opening shape square, circular / round & rectangular. They may be of the conventional-closure or flush-bottom-closure type. Spindle of the gate are two types one rising spindle other non-rising type. Rating of the gate are class (5 meter water column) and class II (5 meter to 10 meter water column) & class III (10 meter to 15 meter water column). The gates mounting on the wall is through thimble an accessory which is first embedded in the wall and its front flange being flush with the face of wall. The gate frame having machined back flanged in mounded on thimble flange, with a gasket in between the flanges, and fastened to it with the help of studs.