Dispax Reactor

The ika dispax-reactor® dr 2000 is a three-stage high shear inline dispersing machine used for the production of very fine emulsions and suspensions. Shear forces that occur in the working chamber produce a drastic increase of mass transfer and accelerate the dissolving rates of mono and macromolecular substances. Three rotor-stator combinations (generators) in a series ensure small- droplet or particle size and a very narrow distribution spectrum. This process promotes a long stability of mixtures in a single pass, especially when working with emulsions.

the dispax-reactor® inline machine uses shear principles similar to the popular ultra-turrax® machines utc and utl. Minimized volume in the mixing chamber ensures uniform shear on the product.

for discontinuous processes, the inline machine dr can be installed with a batch tank or reactor containing the pre-mixed product. When the mixture passes through the dispersing machine, it is homogenized optimally.

for continuous processes, the components to be mixed are fed into the machine at an appropriate rate through the inlet connections. Here, the components are thoroughly mixed, dispersed or homogenized within the machine, and then discharged through the outlet.

in order to configure the dispax-reactor® dr to meet a variety of application needs, ika offers a wide selection of generators. The standard rotor-stator (generator) combination consists of a coarse, medium and fine rotor-stator. When installed in a series, this configuration ensures satisfactory particle size reduction while providing optimum dispersing results in a single pass.

the high shear dispersing machine dispax-reactor® dr 2000 is available in eight sizes. The possible throughput varies from 80 (dr 2000/03) up to 125. 000 l/h (dr 2000/50) when using water. All sizes of machines work with the same circumferential speed of the rotor which provides a reliable scale-up.

advantages of the dispax-reactor® dr 2000 machine:

robust design, which is synonymous with long service life

improved dispersing performance

different dispersing tools to customize the grinding shear rates

simple speed adjustment by use of belt drive

easy scale-up of processes developed with the laboratory machine dr to production machines dr

high-value seal with wear-resistant materials

high quality surface finishes

machine is self-draining, cip and sip capable

all wetted parts are made of 316l/316ti stainless steel

other materials and finishes are available upon request

capable of operating under pressure up to 16 bar

low noise levels

manufactured according to ehedg guidelines (european hygienic engineering and design group)

3a-sanitary conformed and certified

pharmaceutical execution available upon request

explosion protected executions according to atex 95 guidelines deliverable

ika engineers and application experts are available to assist you with selection of machine type and dispersing tools as well as provide you with advice regarding installation of the machine into existing or new process systems.

Other Information

Pay Mode Terms: T/T (Bank Transfer), Other

Minimum Order Quantity: 1 Piece/Pieces

Port of Dispatch: Bangalore

Delivery Time: 2-3 weeks

Packaging Details: Euro Standard Shipping Pallets

7 ply carton boxes.

container capacity : 20 feet and 40 feet

Send Enquiry