Potholes Repair Road Bond

Advantage * Bonds well to cool, damp surfaces. * Low temperature cure * Minimal preparation time for surface repair * Resistance to deformation, bleeding and cracking * No heating required * Stable patch formation * Environment Friendly * Saves time * Minimum man power * Ease in application * Skid resistant Application HINCOL RoadBond is used for the instant repair and maintenance work such as * Pothole * Edge deformation * Trench work * Utility cuts Recommended Procedure * Mark the pothole along the weak area in their vicinity * Cut the edges along the marking and remove all loose material up to the damaged depth * Remove stagnant water, if any * Apply Tack Coat @ 0.5 Kg/10m2 with HINCOL Emulsion RS 1 * Cut open HINCOL RoadBond bag and fill the pot hole up to a level slightly higher that the adjoining road surface. * Spray sand dust or rock dust and compact it with hand hammer or roller * Allow traffic after 15 min. To Ensure Best Results * Damaged area should be cut properly into square or rectangular shape * Store HINCOL RoadBond in Cool & Dry place away from direct sunlight * HINCOL RoadBond bag once open should be consumed in full. Availability HINCOL RoadBond is available in 25 kg water proof bag.