Elite Gold Tile Adhesive

Description
Elite Gold Tile Adhesive a polymer modified cement based high performance, high strength, and high quality tile adhesive developed to fix vitrified tiles. Suitable for both internal and external, thin bed applications.
Specification
Technical Parameters complies with IS Specification
Features & Benefits
Hassel free mixing of Ingredients
Excellent Strength
No Decrement
Economical
Nil Wastage
Easy Extensive
Strict on Quality
Areas of Application
Elite Gold Tile Adhesive is recommended for fixing vitrified tiles. It is also recommended for tile-on-tile, tile-on-mosaic, tile-on-cement floors. Suitable for Wall & Floor applications.
METHOD OF APPLICATION
Surface  Preparation 
Prepare the surfaces before the Elite Gold Tile Adhesive application by removing oil, bond inhibiting agents, dirt, dust and laitance. The cleaning can be carried out with suitable methods like by using wire brush, water jetting, mopping, etc.
Mixing
Tile Adhesiverequires 25% of water by weight of material (4 parts of tile adhesive and 1 part water)
Mix Elite Gold Tile Adhesive to the measures quantity of water using mechanical stirring for 2-3 minutes to ensure a consistency free of lumps
Allow to stand for 2 minutes for the mix to mature and then remix to use
Do not add any extra water to alter the mix consistency or to extend the pot life. Further water additions will hamper the adhesion strength of the Tile Adhesive
Applications
Apply the mixed Elite Gold Tile Adhesive to the prepared substrate using the appropriate notched trowels for the size of the tiles being laid Apply the mixed Elite Gold Tile Adhesive the prepared substrate using the appropriate notched trowels for the size of the tiles being laid
A minimum of 3 mm bed thickness of Tile Adhesive for walls and floors must be achieved
Lay tiles onto the adhesive, firmly press the tile on to the adhesive to ensure good initial bonding, and do not disturb tiles until the adhesive has set
No pre-wetting of tiles is required while using Elite Gold Tile Adhesive
It is recommended to fix the tiles within 30 minutes of spreading of Elite Gold Tile Adhesive to achieve the adequate bonding as per the Technical data provided
Any tile fixing after 30 minutes will lead to improper adhesion and may result in de-bonding of tiles
For vertical area applications, tiling should start from bottom to top
For tile-on-tile, tile-on-mosaic, tile-on-old cement floor application, care should be taken to prepare the existing base with adequate interlocking friction effect by removing polish/wax/top smooth layers
TECHNICAL DATA
Bulk density    1450-1550 Kg/m3
Water powder ratio    25%
Pot life    1 hour
Open time    30 minutes
Adjustable time    30 minutes
Usage time post application    24 hours
Compressive strength @ 28 days    7-8 N/mm2
Slip resistance @ 20 Kg/Sq.m.    0 mm
Coverage @ 3mm per Kg    4 Sq.ft.
Tensile adhesion strength @ 28 days - IS 15477    Values
-    Dry condition    750-850 N
-    Wet condition    550-650 N
Shear adhesion strength     
-  Dry condition @ 24 hour    3.5-4.5 KN
-  Dry condition @ 14 days    10-10.5 KN
-  Wet condition @ 28 days    4.5-5.5 KN
- Heat ageing condition @ 28 days    4.5-5.5 KN
 Note
Allow a minimum of 24 hours for the subsequent usage of the tile fixed areas. Do not tile if temperatures are likely to drop to below 5°C or exceed 50°C. For temperatures below 20°C allow the adhesive to cure for an extended period of time. Pot life, open time and adjusting time depends on the surface absorption, wind factor, temperature, humidity conditions at site.
The technical data provided in this technical data sheet is as per our internal lab testing and may vary as per the actual method of application at sites.