Miranda Hacksaw Blades
Miranda Hacksaw Blades
Hand Hacksaw Blades
| Nominal Size (length X Width x Thickness) | HSS - ALL Hard | HSS - BIMETAL | ||||
| Teeth Per Inch (TPI) | HSS Regular Rs./Piece | HSS Super Cut Rs./Piece | Teeth Per Inch (TPI) | HSS BIMETAL RS./Piece | ||
| Inches | Milimeters | |||||
| 12 x 1/2 x 0.025(23G) | 300 x 12.5 x 0.63 | 14, 18, 24, 32 | 49.00 | 51.00 | 14, 18, 24, 32 |
47.00 |
Power Hacksaw Blades
| Nominal Size (length X Width x Thickness) | HSS - ALL Hard | HSS - BIMETAL | |||
| Teeth Per Inch (TPI) | HSS Regular Rs./Piece | Teeth Per Inch (TPI) | HSS BIMETAL RS./Piece | ||
| Inches | Milimeters | ||||
| 12 x 1 x 0.050 (18G) |
300 x 25 x 1.25 |
10 14 |
213.00 | 10 14 |
179.00 |
| 14 x 1 x 0.050 (18G) | 350 x 25 x 1.25 | 6 10 14 |
240.00 | 6 10 14 |
202.00 |
| 16 x 1 x 0.050 (18G) | 400 x 25 x 1.25 | 10 14 |
317.00 | 10 14 | 278.00 |
| 17 x 1 x 0.050 (18G) | 425 x 25 x 1.25 | 10 14 |
357.00 | 10 14 | 303.00 |
| 18 x 1 x 0.050 (18G) | 450 x 25 x 1.25 | 10 14 |
363.00 | 10 14 | 310.00 |
| 14 x 1 1/4 x 0.062 (16G) | 350 x 32 x 1.60 | 6 10 |
408.00 | 6 10 |
339.00 |
| 16 x 1 1/4 x 0.062 (16G) | 400 x 32 x 1.60 | 6 10 |
472.00 | 6 10 | 387.00 |
| 17 x 1 1/4 x 0.062 (16G) | 425 x 32 x 1.60 | 6 10 | 509.00 | 6 10 | 437.00 |
| 18 x 1 1/4 x 0.062 (16G) | 450 x 32 x 1.60 | 6 10 | 525.00 | 6 10 | 443.00 |
| 18 x 1 1/4 x 0.080 (14G) | 450 x 32 x 2.00 | 4 6 10 | 652.00 | ||
| 18 x 1 1/2 x 0.062 (16G) | 450 x 40 x 1.60 | 6 10 | 700.00 | ||
| 18 x 1 1/2 x 0.080 (14G) | 450 x 40 x 2.00 | 4 6 10 | 774.00 | 6 |
641.00 |
| 20 x 1 1/2 x 0.080 (14G) | 500 x 40 x 2.00 | 4 6 10 | 859.00 | 6 |
708.00 |
| 21 x 1 1/2 x 0.080 (14G) | 525 x 40 x 2.00 | 4 6 10 | 906.00 | 4 6 |
787.00 |
| 22 x 1 1/2 x 0.080 (14G) | 550 x 40 x 2.00 | 4 6 |
949.00 | 4 6 | 854.00 |
| 24 x 1 1/2 x 0.080 (14G) | 600 x 40 x 2.00 | 4 6 10 | 1041.00 | 4 6 | 922.00 |
| 24 x 1 1/2 x 0.100 (12G) | 600 x 40 x 2.50 | 4 6 |
1235.00 | ||
| 28 x 1 1/2 x 0.100 (12G) | 700 x 40 x 2.50 | 4 6 | 1489.00 | ||
| 30 x 1 1/2 x 0.100 (12G) | 750 x 40 x 2.50 | 4 6 | 1659.00 | ||
| 24 x 2 x 0.080 (14G) | 600 x 50 x 2.00 | 4 6 | 1461.00 | ||
| 24 x 2 x 0.100 (12G) | 600 x 50 x 2.50 | 4 6 | 1730.00 | 4 6 | 1426.00 |
| 28 x 2 x 0.100 (12G) | 700 x 50 x 2.50 | 4 6 | 2014.00 | 4 6 | 1643.00 |
| 30 x 2 x 0.100 (12G) | 750 x 50 x 2.50 | 4 6 | 2245.00 | 4 6 | 1892.00 |
| 32 x 2 x 0.100 (12G) | 800 x 50 x 2.50 | 4 6 | 2302.00 | 4 6 | 1940.00 |
| 36 x 2 x 0.100 (12G) | 900 x 50 x 2.50 | 4 6 | 2714.00 |
4 6 | 2284.00 |
| 32 x 2 1/2 x 0.100(12G) | 800 x 55 x 2.50 | - |
4 |
2438.00 |
- Taxes extra as applicable on date of supply.
- Prices are subject to changes without notice
- Width specification are approximate and depend upon availability of RM Steel
- Any other dimensional variability may occur due to RM Steel availability but adequate rigidity in cutting is assured.
